Quick answer: Connect your controller with a USB cable or Bluetooth, press any button, and this free controller tester shows every button, trigger and stick live. Run the stick drift test with your hands off the sticks: a resting peak under 0.05 is healthy, and anything above about 0.12 means real drift. It works with PS5 DualSense, PS4, Xbox Series and Xbox One, Switch Pro and most PC gamepads, with no download needed.
Last updated: November 20, 2026
Controller tester and stick drift test
Stick drift test
Circularity test
Vibration test
All buttons
How to use the controller tester
- Connect the controller to your PC, Mac, phone or tablet. A USB cable is the most reliable. For Bluetooth, put the controller in pairing mode first (see the table below).
- Open this page in Chrome, Edge, Firefox or Safari and press any button. Browsers only reveal a controller after a button press, for privacy reasons.
- Check every input. Each button lights up on the diagram and in the button grid, triggers show their pressure from 0 to 100%, and the stick circles show exactly where each stick sits.
- Run the stick drift test. Lay the controller flat, let go, and press the button. After five seconds you get a verdict and a suggested in-game deadzone for each stick.
- Run the circularity test by rolling each stick around its outer edge a few times, and try the vibration buttons to check the rumble motors.
How to pair your controller over Bluetooth
| Controller | How to enter pairing mode |
|---|---|
| PS5 DualSense / DualSense Edge | Hold the Create button and the PS button until the light bar flashes. |
| PS4 DualShock 4 | Hold the Share button and the PS button until the light bar flashes. |
| Xbox Series and Xbox One (Bluetooth models) | Turn it on, then hold the small pair button on the top until the Xbox logo flashes quickly. |
| Nintendo Switch Pro Controller | Hold the small sync button on the top edge until the lights scroll. |
What the drift test results mean
| Resting peak | Verdict | What to do |
|---|---|---|
| Under 0.05 | No drift | Your sticks are healthy. Any normal game deadzone will hide this. |
| 0.05 to 0.12 | Slight drift | Usually fine in games. Raise the in-game deadzone to the suggested value if your aim or camera creeps. |
| Over 0.12 | Drift detected | The stick is moving on its own. Try the fixes below, and consider a repair or replacement. |
The circularity score shows how evenly a stick reaches its edge in every direction. Under 8% is excellent. Some controllers deliberately reach past the circle at the diagonals, which raises the number without hurting how they play.
How to fix stick drift
- Update the controller. On PS5, go to Settings, Accessories, Controllers and check for a wireless controller update. On Xbox, use the Xbox Accessories app.
- Reset it. The DualSense and DualShock 4 have a small reset hole on the back. Press it with a straightened paper clip for a few seconds, then reconnect with a USB cable.
- Clean around the stick. Power off, push the stick to one side and blow compressed air around the base, rotating as you go. Dust and grime are a common cause of drift.
- Raise the deadzone in your game. Use the deadzone our drift test suggests. Many games, including shooters and open-world games, have separate deadzone settings for each stick.
- Check your warranty. Drift is a hardware fault, so a controller still under warranty may be repaired or replaced for free. The DualSense Edge also has stick modules you can swap yourself.
Playing GTA 6?
Stick drift makes aiming and driving miserable, so it is worth checking your controller before a long session in Grand Theft Auto VI. Then see our GTA 6 frame rate guide and the GTA 6 download time calculator.
FAQ
How do I test my controller for stick drift?
Connect the controller, press a button so this page detects it, lay it flat and run the stick drift test without touching the sticks. A resting peak under 0.05 means no drift.
Can I test a PS5 controller on a PC or phone?
Yes. Connect the DualSense with a USB-C cable or pair it over Bluetooth, then open this page in Chrome, Edge, Firefox or Safari and press any button.
Why isn't my controller showing up?
Press a button after the page loads, because browsers hide controllers until you do. If it still does not appear, try a different USB cable (some are charge-only), re-pair it over Bluetooth, or switch to Chrome.
Does vibration testing work on every browser?
Rumble works best in Chrome and Edge. Firefox and Safari can read buttons and sticks but may not support vibration.
Is a small drift reading normal?
Yes. Every analog stick has a little noise at rest. Readings under 0.05 are normal and hidden by the default deadzone in almost every game.
More gaming tools and guides: GTA 6 frame rate · GTA 6 download calculator · Can I run GTA 6? · Gaming console guides
PlayStation, DualSense and DualShock are trademarks of Sony Interactive Entertainment. Xbox is a trademark of Microsoft. Nintendo Switch is a trademark of Nintendo. Stealthy Gaming is not affiliated with these companies.

Hi, I’m Ankit Kumar, the founder of StealthyGaming. I handle everything from SEO to researching and writing gaming articles. I’m passionate about helping fellow gamers stay updated with the latest tips, guides, and news. When I’m not optimizing content, I’m probably testing out new games or digging into strategies to make my articles as helpful and engaging as possible.
Our guides are researched, fact-checked and updated as games change. How we research and verify our guides.