(7 Ways) Fix: Xbox 360 S Red Ring of Death

When you turn on your Xbox 360 and see three red lights flashing around the power button instead of the usual one to four green lights, this is known as the “Red Ring of Death”.

It indicates an internal fault that has to be serviced.

The Xbox 360 S‘s power button is designed differently than on previous generations, without any backlighting.

As a result, the “Red Dot of Death,” as some have called the blinking or illuminated red light in the center of the power button, serves as an error indicator.

Robux to Dollar Converter
Ad 1

Why does my Xbox 360 S have Red Ring of Death?

Short Answer: Xbox 360 S, often known as the Xbox 360 Slim, does not really suffer from a Red Ring of Death since Microsoft removed the red LEDs. However, it may experience the dreaded Red Dot of Death error if its internal temperature becomes too high, its power source fails, or its case has insufficient ventilation.

Xbox 360 S Console
Image Source: YouTube

To put your mind at ease, the dreaded “Red Ring of Death” error will not occur even if your new slim Xbox 360 S has a technical glitch.

In fact, Microsoft has removed all red LEDs from the hardware itself, which is why the system no longer displays any error messages.

The Xbox 360 Slim Red Ring of Death issue is practically non-existent.

While the classic 360’s “Red Ring of Death” have been eliminated for good, the slim 360 introduces a new failure notification, that is the Xbox 360 Slim Red Dot of Death.

This happens if the console isn’t getting enough air flow, if it becomes too hot, or if there’s a problem with the electricity going into it.

If your console isn’t getting enough air flow, you’ll have this problem.

Make sure there is enough room around your console for air to flow and that it has enough ventilation.

The console will shut down and flash red on the power button if it becomes too hot to handle.

You may attempt to repair this by relocating the console in a cooler location or cooling it down with a fan.

After a few seconds or minutes, the power supply light should not be red, as that would indicate that something is wrong with the power supply itself.

If the light is red, trying a new power adapter may be the answer to getting your device to work again.

Fix: Xbox 360 S Red Ring of Death

Method 1: Make the Xbox stand vertically.

The Xbox 360 S will alert the gamer by flashing its power light and entering shutdown mode if it determines that it isn’t receiving enough air.

The console may be used in either a vertical or horizontal orientation, however it is more comfortable when held in the former.

This horizontal layout is quite inconvenient. The best placement for the console is vertically so that airflow is not restricted.

If vertical space is limited, lay it horizontally; just be sure to clean it regularly.

Method 2: Avoid setting the console down on the carpet.

If you place the console on the carpet, airflow will be restricted.

The carpet will be pushed into the console if you don’t vacuum, and that might cause issues.

Always choose a flat, clean, and clutter-free surface while setting up your console. A table or shelf is your best bet.

Method 3: Conduct a thorough cleaning of the console.

Shut off your Xbox before you clean it. Make sure the appliance is disconnected to prevent being shocked.

It’s important to check the console’s rear panel where you can examine the ventilation holes or grills.

These are helpful in allowing heat to escape and avoiding overheating in the first place. Use a moist cloth to wipe off the grills.

After that, you should examine the panel on the side of the console. The tiny holes via which the heat escapes are clearly seen here.

Clear the openings by forcing air through them to see if anything is blocking them.

We advise cleaning the control panel once every two to three months. You don’t have to take it apart.

Method 4: Reset your console.

  • Step 1: Click “Settings” on the main menu.

  • Step 2: Go to System and then Console Info.

  • Step 3: Hit the Reset console button.

After selecting Reset console, you’ll be presented with three options.

Reset and remove everything:

If you choose this, the Xbox will be completely erased, including any saved games or user profiles. The settings are restored to their original state.

Reset and keep my games & apps:

If you’re having problems with your Xbox, this is the best menu to choose. You may reinstall the OS without worrying about losing any of your data or programs.


In the event that you change your mind about resetting the console, you may press the “Cancel” button.

  • Step 4: Select an option, and the system will carry it out for you.

Method 5: Using a different power supply

Xbox 360 S red dot of death

It is strongly suggested that a professional check both the console and the power supply.

It’s possible that the problem is related to the current itself, the voltage regulation, or a defective coil.

If your power source is failing, you may get in touch with experts to replace it.

Method 6: Put down the console for a while.

If you play for long hours, the console will experience significant strain. Long sessions of gaming put extra strain on the system.

Consequently, there is a greater possibility of overheating. Be sure to take breaks from playing on your console.

It’s not healthy for you to keep working without taking breaks. Taking a few short breaks will be good for both the console and your health.

Because of this, your console will not only last longer, but it will also be protected from overheating.

Method 7: Put in a repair request.

If none of those options is successful, the console may need to be sent in for servicing.

Xboxes remaining under their manufacturer’s warranty period may be sent in for servicing and returned to their owners.

The support staff can point you in the right direction even if your warranty has long since expired.

Follow us on Twitter & like our Facebook page for more post-updates